ppr热熔管件品牌-艾菲力塑胶-黄山ppr热熔管件

ppr管安装的小窍门

ppr管材管件连接时，应在墙壁上表上记号和位置，方便日后管道的维修，尽量避免管子暴露在外面，ppr管热熔连接件，以免受碰撞而损坏。

ppr管冷水和热水管需要分开槽来安装。

Tips for PPR tube installation

When connecting PPR pipes and fittings， marks and place should be marked on the wall to facilitate future pipeline maintenance， and the pipes should not be naked to the outside to *oid damage caused by collision.

PPR pipe cold water and hot water pipe need separate tank to install.

ppr管与其他塑料管材连接

PPR管材与其他塑料管材连接的情况，ppr热熔管件品牌，不是很多，当PPR 管材与 PERT 管材连接时，PPR 管材连接 PPR转PERT转换接头的PPR一侧，PPR 管材与 PB 管材连接时，PPR 管材连接 PPR转PB 转换接头的PPR一侧。

ppr管在电气部分：

部分开关、插座被后续的给、排水管道、厨卫风道等掩盖，合肥ppr热熔管件，所以施工前必须结合土建预留预埋，考虑到位。

室内强、弱电插座盒位置不合理，强电盒距弱电盒距离太近，一般要求为20cm，特别是卧室的插座，后期业主装修时插座被衣柜、床遮住，造成业主不满意。

PPR tube in the electrical part:

Some switches and sockets are covered by subsequent water supply and drainage pipes，ppr热熔管件厂家， kitchen and bathroom air ducts， so they must be reserved and embedded in combination with civil engineering.

The location of the indoor strong and weak current socket box is unreasonable. The distance between the strong and weak current boxes is too close. Generally， it is required to be 20cm， especially for the socket in the bedroom. The socket is covered by the wardrobe and bed during the later decoration of the owner， causing the owner dissatisfaction.