山东省纺科院(图)-销售ASTM医用面罩燃烧仪-燃烧

(11)

Slide door (J， fig. 2). A glass door in its normal

slides in

the grooves at the fro*f the cabinet.

(12)

Fuel-co*ol valve (K， fig. 2). This valve cists of a sensitive

co*ol device for regulating the fuel supply at the tank. The valve ends in

a1/2-inch male cnnection for attachment to the standard butane tank of 2

pounds capacity.

（11） 滑动门（J，图2）。正常位置的玻璃门在柜子前面的凹槽中滑动。

（12） 燃油控制阀（K，图2）。该阀由一个灵敏的控制装置组成，用于调节油箱的燃油供应。阀门端部为1/2英寸外螺纹连接，用于连接2磅容量的标准丁烷罐。

LFY-602B 小45°阻燃性能测定仪

(1) Draft-proof chamber

with vented top (A， fig. 2). Thi*etal chamber prevents air circulation

around the specimen rack and flame， but permits free ventilation for rapid

oxidation. The chamber is 141/2inches wide， 81/2inches deep，销售ASTM医用面罩燃烧仪， and 14 inches

high. There are 12 half-inch holes equidistant along the rear of the top

closure. A ventilating strip is provided at the base of the slidin*lass

（1） 顶部通风的防风室（A，图2）。这种金属室防止样品架和火焰周围的空气循环，供应ASTM医用面罩燃烧仪，但允许快速氧化的自由通风。这个房间宽141/2英寸，深81/2英寸，高14英寸。有12个半英寸的孔，沿顶部封盖后部等距。在滑动玻璃的底部设有通风条

e-CFR Data is current as of March 3，ASTM医用面罩燃烧仪， 2008

Title 16: Commercial

Practices

Browse Previous | Browse Next

PART 1610—STANDARD FOR THE FLAMMABILITY OF CLOTHING TEXTILES

Section Contents

Subpart C—Interpretati and

Policies

(15)

Stopwatch and timing mechani* (N， fig. 2). This watch， by means of

special attachments， is actuated to a start by connection with the gas jet (E，

fig. 2). A driving mechani* on rear of cabinet ( S，燃烧， fig. 2) moves the

gas jet to it*ost forward ition and automatically starts the timing at the

mome*f flame impact. The falling weight (H， fig. 2)， when caused to move by

severance of cord (F， fig. 2)， s the watch. Timing is read directly.

（15） 秒表和计时机构（N，图2）。该表通过特殊附件，通过与气体喷射器（E，图2）的连接启动。机柜后部的驱动机构（S，图2）将气体射流移动到其前面的位置，并在火焰冲击时自动开始计时。落锤（，图2）因绳索（F，图2）的分离而移动时，使手表停止转动。计时是直接读取的。

山东省纺科院(图)-销售ASTM医用面罩燃烧仪-燃烧由山东省纺织科学研究院提供。行路致远，砥砺前行。山东省纺织科学研究院致力成为与您共赢、共生、共同前行的战略伙伴，更矢志成为*仪器仪表具有竞争力的企业，与您一起飞跃，共同成功!