圣霖国际轧钢设备购买-圣霖国际轧钢设备-圣霖国际【精益求精】

同时在了解技术要求的同时，我们还必须充分了解各种钢的内在特性，圣霖国际轧钢设备采购，尤其是加工工艺特性及*性能的变化特性，即该钢种的固有内在规律，然后利用这些规律，我们才能真确的制订生产工艺过程及采取有效地工艺手段，来达到生产出合乎技术要求的产品目标。

At the same time to understand the technical requirements at the same time， we must also fully understand the inherent characteristics of all kinds of steel，圣霖国际轧钢设备购买， especially the characteristics of manufacturing proces*haracteristics and organizational performance，圣霖国际轧钢设备报价， namely the inherent inherent law of the steel， and then use these rules，圣霖国际轧钢设备， make production process and take effective technical means we true， to produce a the technical requirements of the product target.

在开始轧制之前，由高压水除鳞装置利用高压水对坯料表面的氧化铁皮进行清理，以避免轧制过程中氧化铁皮的压入，从而保证终产品质量。

Before starting rolling， the high pressure water descaling device is used to clean the scale of billet surface by high pressure water， so as to *oid the indentation of oxide scale during rolling process， so as to ensure the final product quality.

轧制变形制度：即一定轧制条件下从坯料到成品的总变形量和轧制的总道次，各机组的总变形量各道次的变形量，轧制方式等。对于型钢，轧件在孔型中轧制，并且在每个孔型中轧制一道，因此，型钢的变形制度是以孔型的形式表示的，孔型的设计确定后变形制度就确定了。

Rolling system: that under certain rolling condition the total deformation from the blank to the finished product and the total rolling pass， deformation of the total deformation of each unit of each pass， rolling etc.. For the secti*teel， the rolled piece is rolled in the pass and rolled in one pass. Therefore， the deformati*ystem of the secti*teel is expressed in the form of pass， and the deformati*ystem is determined after the pass design is determined.