霍尼韦尔防火开关L4064B2210现货

第一枪帮您来“拼单”，更多低价等你来！

霍尼韦尔防火开关L4064B2210现货

名称苏州乡林楼宇智能科技有限公司【公司网站】
所在地中国江苏苏州吴中区
联系人 李静洁
价格 ￥330元/件 点此议价
采购量不限制
发布日期 2020-05-28 10:38 至长期有效

热线：13151177225

来电请说明在第一枪看到，谢谢！

霍尼韦尔防火开关L4064B2210现货产品详情

查看全部开关产品>>

规格:25*10
品牌:其他
结构特点:其他
功能:其他
型号:L4064B2210

L4064B, L4064R UNIVERSAL COMBINATION FAN AND LIMIT CO*OLLERS Do not exceed the following electrical ratings (amperes): 1. Remove cover by removing screw, squeezing sides and pulling off. Insert element in plenum and mark Table 1. Electrical Ranges location of mounting holes. Make sure the case is 120 Vac 240 Vac snug against the plenum before marking the mounting holes. FAN LIMIT FAN LIMIT 2. Punch or drill holes for mounting screws. Full Load 14 8 7 4 3. Place insulation between plenum and case Locked Rotor 84 48 42 24 4. Fasten co*oller securely with mounting screws. if necessary. Pilot Duty: 2 A at 24 Vac; 0.25 A at 0.25 to 12 Vdc. (167 ºF) (min.) field wiring required. Wiring must conform Swivel Mounting (Fig. 2 Maximum Combined Connected Load: 2000 VA. 75 ºC to NEC Class 1 requirements. The L4064B and L4064R may be swivel-mounted. The swivel bracket requires a 1-9/16 in. (39.7 mm) hole in Approval the plenum. — IP20 compliance — CE pin number 0085BM0320, valid for B type. 1. Use bracket as a template to make the location of — DIN Certco registration: mounting holes in plenum. Drill or punch holes for L4064B IS Classified as TR/TW; mounting screws. — CSA certified file #LR1622 2. Fasten the bracket in place with furnished screws. — UL listed file #L1322-336 Start the screws but do not tten. 3. Insert element tube throu bracket, straiten conLOCATION troller, and fasten. Tten the mounting screws securely. It may be necessary to rotate the bracket to titen all screws securely. If th*a replacement installation, locate the L4064 in the same location as the co*ol being replaced. Sensing tube length should be same as old co*ol. If th*a new installation, the element should be installed only by a 32612A SWIVEL trained, experienced service technician according to the BRACKET furnace manufacturer’s instructi*. The element must not touch any internal part of the furnace. temperature of 190 ºF (88 ºC). If plenum surface temperature exceeds 190 ºF (88 ºC), heat insulating material or mounting bracket must be used. REQUIRE 1-9/16 IN MOUNTING [39.7mm] DIAMETER HOLE IN PLENUM The device*ay be mounted as follows:

L4064B — Swivel mount FURNACE

L4064R — Swivel mount PLENUM M31164 FURNACE Fig. 2. Swivel mounting requires a 1-9/16 in. (40 mm) PLENUM diameter mounting hole for element insertion. ADD HEAT INSULATING MATERIAL IF NEEDED M31163 Fig. 1. Surface mounting for L4064B requires a 13/16 in. (20.6 mm) hole. Surface Mounting (Fig. 1) L4064B—Hole in plenum should be just large enouh to accommodate the 3/4 in.(19.1 m*ameter element tube. A 13/16 in. (20.6 m*ameter hole is M34080 recommended. Fig. 3. Swivel mount (front view).

以上内容为霍尼韦尔防火开关L4064B2210现货，本产品由苏州乡林楼宇智能科技有限公司直销供应。

声明：第一枪平台为第三方互联网信息服务提供者，第一枪（含网站、小程序等）所展示的产品/服务的标题、价格、详情等信息内容系由会员企业发布，其真实性、准确性和合法性均由会员企业负责，第一枪概不负责，亦不负任何法律责任。第一枪提醒您选择产品/服务前注意谨慎核实，如您对产品/服务的标题、价格、详情等任何信息有任何疑问的，请与该企业沟通确认；如您发现有任何违法/侵权信息，请立即向第一枪举报并提供有效线索。我要举报