冷拉设备生产-冷拉-圣霖国际【开拓*】

冷床是中小型棒材车间不可缺少的辅助设备之一。它的功能是将轧机轧制后经飞剪剪切成倍尺长度的棒材， 输送并卸到冷床齿条上冷却， 使其温度由900℃降至100 ～ 300℃。

The cooling bed is one of the auxiliary equipment in the *all bar workshop indispensable. It is the function of the bar rolling mill after double length flying shear，冷拉设备报价， conveying and discharging to the cooling bed rack， the temperature 900 DEG C to 100~300 C.

轧钢机械辊道部分设计与制作，冷拉，它是根椐轧钢设备的规格和轧制的品种而特定的，如机械化程度高的要求不一样，如大型轧钢厂须配备翻钢辊道，自动升降辊道和全自动步进式冷床，冷拉设备价格，轧钢机一般包括主要设备（主机）和辅助机械（辅机）两大部分。

The rolling mill roller table is designed and made，冷拉设备生产， which is specific according to the specificati* of the rolling equipment and the variety of rolling， such as the requirements of high mechanization， for example， the large rolling mill must be equipped with a rolling mill roller， an automatic lifting roller and a fully automatic step cold bed， and the rolling mill generally include*ain equipment (main engine) and auxiliary machinery (auxiliary machine). ) the two part.

侧壁斜度超差产生的原因为：

（1）辊型不正；压力过大，型钢与矫直辊间隙过小。

（2）辊子磨损、矫直机轴窜动过大，液压螺母没有锁紧或者止推轴承磨损过大都会引起侧壁斜度超差。

The reas* for the deviation of the side wall slope are:

(1) the roll type is not correct; the pressure is too large and the gap between the type steel and the straightening roller is too *all.

(2) the roller wears， the straightening machine shaft moves too big， the hydraulic nut is not locked or the thrust bearing wear too much will cause the side wall slope to exceed the difference.