pur热熔胶湿气反应型复合机 布料复合机

有客户上来就问你们厂生产的复合机多少钱一台？

这让我如何回答你，起码告诉我你是复合什么材料，用什么胶*幅多宽，需要哪些配置。

这样我才能知道你需要哪种复合机，哪些配置适合你！我才能给你报价啊，才****~

温馨提示：

由于市场价格浮动影响，以上产品价格、属性仅供参考，详情以来电咨询为准，真诚期待与您的合作，也希望能把我们好的服务，好的产品传递给您！！

我们每款机器出厂前必须要经过您的试样才能够出厂 

我们的售后承诺：一年保修，终身维护，定期提示*

24小时服务热线（微信）：13851340306（朱先生）

PUR热熔胶复合机设备及各组成部件工作原理PUR热熔胶机(简称：PUR热胶机)

设备：是一种可将固态的PUR热熔胶熔化，并通过加压装置将熔化后变为液态的胶输送到胶涂布装置对基材实行涂布。集*温度控制功能﹑流体加压输送功能和挤出涂布功能于一体的机电设备。另具备自动控制及自动跟踪生产线速度的功能。

主机：具备加热保温，熔化胶液，输出胶液，控制胶液压力，初级过滤等功能.主机温度应控制在比胶液熔点温度高5-10度，使之具有一定的流动性，使压力控制更为准确。

喉管：具备加热保温，导流胶液的作用，将液态热熔胶由主机输出至枪座模块的功能，温度保持在稍高于胶液熔点温度即可。

枪座：具备加热保温，二级过滤.并将胶液输送至枪体.并视需要，加热压缩空气的功能.可视喷胶效果适当****温度。使胶液流动性更好。

枪体：具备打开及关闭胶液的功能，并按需求配套各种喷嘴及刮嘴，以满足用户的需求，有螺旋喷枪，涂布刮枪，纤维喷枪，Z字型喷枪，点状枪等等。

自动补偿控制系统：具备输出信号控制电磁阀，由电磁阀控制的压缩空气带动枪体的工作来控制胶液的打开及关闭。并输出0-10V 直流电压控制变频器带动马达转动。输出电压与被被测生产线速度成正比。可在线调整胶位、断胶长度及跟踪电压。检测生产线速度的装置有接近开关，旋转编码器等。

PUR热熔胶在行业内统称，其实热熔胶有很多种类，包括EVA、PA、PES、PUR、压敏胶热熔胶等等。

Operational requirements:
Operators can operate the equipme*nly after they are fully familiar with the performance and working principle of the machine. The equipment must be operated by a special person, and non-operator can not be disorderly opened and disturbed.
Before production, electrical appliances such as cables, circuit breakers, contactors and motors should be inspected to meet the requirements.
Before production, it is necessary to check whether the three-phase power supply is balanced or not, and startup equipment without phase is strictly prohibited.
During the production period, it should check whether the rotary joints are safe, whether the pipeline is *ooth, whether there is any damage, oil leakage, and timely removal.
The hot oil engine must be turned on before production, and can be produced only after the temperature is raised to the required temperature of the process. Before production, check whether the pressure of each barometer is normal, whether there is air leakage in the air passage, and repair it in time.
Before large-scale production of equipment, *all-scale test should be done before large-scale production can be achieved.
Before production, the lubrication conditi* of hydraulic stati*, reducers, bearing bushe*rew, etc. should be checked, and the hydraulic oil and lubricating oil should be injected correctly and timely.
After shutdown, the ru*er trough and scraper accessorie*esh roller*ust be cleaned in time to remove residual glue and dirt from all parts of the machine for next use.